Description
Interest in renewable energy has increased over the past few Years due to solar Power becoming more cost effective and eco-friendly. This is a solar inverter which allows power to be switched from the DC Power.
obtained from solar Panels to the AC Power needed to control the pump. with the renewable solar inverter, pumps can adapt to solar power sources rather than traditional electrical supplies or generators.
This solar inverter is built-in with MPPT Solar Charger to maximize solar power. Besides, it is easy to install with low maintenance cost. it is easy to install with low maintenance cost. It became an eco-friendly solution for the rural areas where grid power is expensive and unreliable.
Besides, this inverter also accepts single-Phase AC input. It allows the inverter to automatically switch between PV power and AC utility to guarantee water pump operation during night time.
Features
- Built-in high efficiency MPPT solar charge controller with VFD
- Supports single phase or three-phase asynchronous motor
- Built-in full protection and self-diagnosis
- Soft start function prevents water hammer effect & extends system lifecycle.
- Built-in LEDs and display screen for real-time system status and updates
- RS-485 communication port available
- Suitable for up to 20HP AC Pumps
Product Overview
- PV input
- Single-Phase AC Inputs
- AC Output
- RJ45 Port(RS-485 Communication)
- RS-232 Communication Slot’
- Single Control slot
- Display screen
- LED indicators
- Operation Buttons
Basic System ArchitectureThis Solar inverter is specially designed to power water pump. The following illustration show basic application for this inverter. it also includes PV modules and remote float switches to have a complete running system.
2.2kw Solar Master
| MODEL | 2.2 kW LS |
| Pump Size Supported | Up to 3HP |
| Motor Type | Single Phase / Three Phase |
| Maximum PV Array | 3500 W |
| Rated Output Power | 2200 W |
| PV INPUT DC | |
| Nominal DC Voltage | 330 VDC |
| Maximum DC Voltage | 450 VDC |
| Start-up Voltage | 120 VDC |
| MPPT Voltage Range | 120 ~ 420 VDC |
| OUTPUT | |
| Nominal Voltage | Single Phase: 220/230/240 VAC |
| Three Phase: 3 x 220/230/240 VAC | |
| Efficiency | > 97% |
| Output Current | 14A – Single Phase Asynchronous Motor |
| 10A – Three Phase Motor | |
| Frequency Precision | ± 0.2 % |
| PROTECTION | |
| Full Protection | Dry Pumping, Phast Lost, Over-voltage, under-voltage, over-current, surge, |
| over temperature, short circuit protection | |
| Type of mechanical protection | IP20 |
| PHYSICAL | |
| Dimensions D x W x H (mm) | 110 x 230 x 342 |
| Net Weight (kgs) | 5 |
| INTERFACE | |
| Communication Port | RS-232 / RS-485 |
| ENVIRONMENT | |
| Humidity | 5% to 95% Relative Humidity(Non-condensing) |
| Operating Temperature | -20°C to 45°C at 100% load |
| 46°C to 60°C power derating | |
